Rig Cooling Submersible Pump
- Sinoflo
- China
- 15-30days as per different pump material
Technical Parameter:
-Power supply: 380V/460V/660V/1KV/10KV, 50Hz/60Hz, 3Ph;
-Flow rate: 10m3/h~2400m3/h;
-Head: 10m~300m;
Product Overview
Sinoflo Rig Cooling Submersible Pump is suitable for sea water or corrosive liquid extracting or lifting work. It is widely used in petroleum, chemical industry, shipbuilding, marine fire-fighting, ship load regulation, and also used to extract ordinary drinking water, mineral water and so on.
Installation
Vertical, horizontal and inclined. The water inlet should be immersed in the sea level (at low tide) below 1.5m, and motor base to sea bottom is usually not less than 2m. Under special conditions, the motor base can also be inserted into the sea bottom, but the height between pump inlet and sea bottom must be higher than 0.5m,
Motor chamber must be filled with clean water or filled with antifreeze as needed.
Technical Parameter
Frequency: 50Hz/60Hz;
Flow rate: ~2400m3/h;
Head: ~300m;
Material: S.S316(L)/duplex steel/nickel aluminum bronze, etc.;
Sinoflo is the leading supplier of all kinds of pumps to be used in agriculture, industrial etc. Surface pumps These are hydraulic machines suitable to work in a dry and covered surface They must not be immersed into liquid to move. This kind of product includes single or multi stage pumps for horizontal or vertical operation. Circulator and in-line pumps Very similar to the surface pumps, m...more
