Canned Vertical Turbine Pump (VS6)

Product Overview

Sinoflo Canned Vertical Turbine Pump (VS6), also called as vertical suspended pump is a kind of multi-stage, long shaft radial split pump, equipped with an API can. The first stage impeller is generally a suction type impeller. The axial force is bore by the radial thrust ball bearing. In the case where there is large differential pressure, the axial force is balanced by the balance drum device. The can only bear the inlet pressure, and the can's length and pump installation depth is mainly depend on the NPSH cavitation performance requirements. If the pump is installed on the vessel or connected to the pipe flange, the can may not be installed. The bearing is lubricated with thin oil and has an independent internal circulation automatic lubrication system. A hydrodynamic radial sliding bearing is located at the pump inlet. The pump shaft has an intermediate support with a certain installation depth and its support is lubricated with liquid. The shaft seals are in the form of a single mechanical seal and series mechanical seal, comes with a cooling, flushing or sealing system. The suction and the discharge are located at the upper part of the mounting flange at 180 degrees to each other, and other layouts are also possible. The motor drives the pump through a flexible coupling. Viewed from the drive end, the pump rotates counterclockwise.

Application

• Refineries

• Desalination plants

• Condensate extraction

• Tank fluid transfer

• Petrochemical plants

• Oil fields and terminals

• Off-shore and on-shore installations

• Reverse osmosis

• Synfuels

• Paper mills

Technical Parameter

• Max. Flow: 800 m³/h;

• Max. Heads: 800m;

• Max. Working Pressure: 10MPa;

• Temperature Range: -80~210°C;